Skylark AAT Suite is aimed for FPV enthusiasts. It includes a Auto Antenna Tracker unit and a Trace OSD unit
Features
Easy to install and easy to use
PAL/NTSC compatible
60A current sensor
RSSI Auto detected | Auto "Setting Home"
With barometer
Free firmware upgrade
Tracks 360º horizontally and 90º vertically
Auto Antenna Tracker includes compass
Open API | Support secondary development
Basic principle
When the Trace OSD powers on, if GPS get over 4 satellite signals, OSD will save the position as HOME point.
The Trace OSD calculates the angles that the AAT should rotate, according to the current position and HOME point.
The Trace OSD send the angle information to Skylark AAT via Audio channel of TX..
The AAT(Auto Antenna Tracker) only receives the angle information and doesn't record data.
Recommended procedures
1. Keep the OSD closing your AAT
2. Power on Trace OSD or Reset Trace OSD, and get the HOME point.
3. Check the AAT orange light is blinking.
4. Start Flying
Features
Easy to install and easy to use
PAL/NTSC compatible
60A current sensor
RSSI Auto detected | Auto "Setting Home"
With barometer
Free firmware upgrade
Tracks 360º horizontally and 90º vertically
Auto Antenna Tracker includes compass
Open API | Support secondary development
Basic principle
When the Trace OSD powers on, if GPS get over 4 satellite signals, OSD will save the position as HOME point.
The Trace OSD calculates the angles that the AAT should rotate, according to the current position and HOME point.
The Trace OSD send the angle information to Skylark AAT via Audio channel of TX..
The AAT(Auto Antenna Tracker) only receives the angle information and doesn't record data.
Recommended procedures
1. Keep the OSD closing your AAT
2. Power on Trace OSD or Reset Trace OSD, and get the HOME point.
3. Check the AAT orange light is blinking.
4. Start Flying
